top of page


STEP 3: Add Fill (KIT B/B+ ONLY)

Next, add 1/2" to 3/4" of additional Paver Base material around the pavers  by scooping & spreading by hand or trowel. Broom off pavers as necessary, level and compact with a piece of 2" x 4" or similar. Taper the perimeter edges if applicable to meet other hardscape finishes. Do the best you can to finish with a level surface, but there is some flex in the turf for final adjustments and the base shifts easily, so perfection is not necessary. 

(2 ) 50# Bags Paver Base = +/-  1/2" to 3/4" per 4' x 8' PaverTurf (32 SF) 

PaverTURF Install

Adding additional base material around the pavers in the grids helps to build up the PaverTurf so the grass fibers stand above the top of the stones by a minimal .5 inches or more depending on your desired aesthetic.   

 PaverTURF Installation
PaverTURF Pre-Cut Patio Grid
bottom of page